Datasheet4U Logo Datasheet4U.com

ADP5061 Datasheet Tiny I2c Programmable Linear Battery Charger

Manufacturer: Analog Devices

Overview: Data Sheet Tiny, I2C Programmable, Linear Battery Charger with Power Path and USB Mode.

General Description

The ADP5061 charger is fully pliant with USB 3.0 and the USB Battery Charging Specification 1.2 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.

The ADP5061 operates from a 4 V to 6.7 V input voltage range but is tolerant of voltages up to 20 V.

The 20 V voltage tolerance alleviates the concerns about the USB bus spiking during disconnect or connect scenarios.

Key Features

  • 2.6 mm × 2 mm WLCSP package Fully programmable via I2C Flexible digital control inputs Up to 2.1 A current from an ac charger in LDO mode Operating input voltage from 4.0 V to 6.7 V Tolerant input voltage from.
  • 0.5 V to +20 V (USB VBUS) Fully compatible with USB 3.0 and USB Battery Charging Specification 1.2 Built-in current sensing and limiting As low as 30 mΩ battery isolation FET between battery and charger output Thermal regulation prevents over heating Compliant with JEITA 1 and JEI.

More Datasheets from Analog Devices

Part Number Description
ADP5062 Linear Li-Ion Battery Charger
ADP5063 Linear LiFePO4 Battery Charger
ADP5065 Fast Charge Battery Manager
ADP5014 Integrated Power
ADP5020 Power Management
ADP5022 600mA Buck Regulator
ADP5023 Regulators
ADP5024 Regulators
ADP5030 High Performance RF LDO
ADP5033 800mA Buck Regulators

ADP5061 Distributor